- Storm™ Sealant with Sil-X ™ technology delivers an immediate waterproof seal on any building material*, wet or dry, indoors or outdoors.
- It can even be applied in the rain to stop leaks in an instant.
Features:
- Provides an immediate waterproof seal to stop leaks
- Can be applied to wet or dry material*
- Good adhesion on any material* even when applied in the rain
- Excellent UV and weather resistance
- Long lasting flexibility
- Paintable with 2 coats of water-based paints
Where can this product be used?
- Sky lights
- Gutters
- Down pipes
- Windows
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fibreglass
- All construction substrates
- Most plastics*
- *Not for PE, PP, PTFE, permanent water immersion or plugging leaks subject to pressure. Forms an instant seal, but must not be disturbed until cured (approx. 48 hours).
How to Use:
- Ensure substrates are clean and free of oil, grease or loose particles.
- Cut cartridge tip, fit to nozzle and cut to size (5mm), then place in caulking gun.
- Apply with the caulking gun, pushing sealant into joint or gaps.
- Smooth off using a spatula dipped in turps, within 5 minutes of applying. If painting, paint with two coats of a quality water-based exterior paint.
Clean up:
- Clean up with mineral turps before Storm cures.
- Cured sealant can be removed by scraping or sanding or with the help of Selleys Silicone Remover.
